Global SPX FLOW

Global Website

Americas

Asia - Pacific

Power Team

Global - English

Asia - Pacific

Europe

  • Accessories: Pressure Switch (9625)

    Page 131 - Accessories_Pressure_Switch_9625

Image 1of 1
  • Accessories: Pressure Switch (9625)
Product Type:

Pump Accessories

Used in hydraulic circuit where system pressure must be "held". Automatically (electrically) turns off pump motor when predetermindd system
 
Find a location near you:
Search

Application: Used in a hydraulic circuit where system pressure must be “held.” Automatically (electrically) turns off pump motor when predetermined system pressure is reached.


Attaches directly to control valve manifold or can be mounted “in-line” to read system pressure. Has a 1/4" NPTF male thread, and a 1/4" NPTF fitting for gauge mounting if required. Adjustable from 1,000 to 10,000 psi (70 to 700 bar). Can also be used to actuate other electrical devices in the system. Wired “normally open” and held closed by spring pressure.


IMPORTANT: Electrical rating of switch is 5 amps at 250 volts max. To prevent permanent damage to switch, a control relay must be installed to handle currents or voltage exceeding these limits. Pressure switch should never be used to directly actuate the electrical motor.



Order
Number
DescriptionWeight
(lbs)(kg)
9625In-line pressure switch with 1/4" NPTF gauge port.1.10,5


Pressure Switch (9625) – Diagram
Valve In-Line Diagram (9500, 9625, 9581) – Diagram
Catalog
Operating Instructions
Parts List