Pumps

Product Type(s) : Pumps

Description :

WHERE TO BUY

PE55 Series

Where To Buy View More

700 Bar (10,000 PSI) CLASSIC SERIES ELECTRIC HYDRAULIC PUMP

Features

704 cu. In./min. Vanguard® series torque wrench pump.
10,000 psi (700 bar) classic series electric hydraulic pump the PE55TWP-BS has been the market leading electric pump for over 30 years & is therefore tried & tested.
A simple, light-weight design with a recent upgrade that has created a cost-effective workhorse.
Quality means lower life-cycle costs: over 100,000 cycles continuous duty up to 122°f (50°c) ambient
proven design = proven reliability
enhanced usability:
two-speed high-performance pump
retract side internal relief valve protects tool
Use with single or double acting tools.
Not for lifting applications 4" calibration capable gauge
Designed with Safety in Mind:
Easily adjusted pressure regulator (relief) valve
Has a retract port pressure selector 10,000 psi (1,500)
this system should not be used for lifting applications.

View Catalog - PE55 Series - US ‖ UK ‖ CN ‖ DE ‖ ES ‖ FR ‖ IT ‖ TR

RWP55-BS

700 BAR (10,000 PSI) CLASSIC SERIES AIR HYDRAULIC PUMP

Features

The RWP55-BS has been the market leading pump for over 30 years & is therefore tried & tested. A simple, light-weight design with a recent upgrade that has created a cost-effective workhorse.

Quality means Lower Life-Cycle Costs:

Over 100,000 cycles
Continuous duty up to 50°C (122°F) ambient
Proven design = Proven reliability

Enhanced Usability:
• Powerful 3 hp motor starts under load
• Retract side internal relief valve protects tool
• Use with single or double acting tools. Not for
lifting applications
• 4" calibration capable gauge

Designed with Safety in Mind:
• Easily adjusted pressure regulator (relief) valve
• Has a retract port pressure selector 103 or 700 bar
(1,500 or 10,000 psi)

View Catalog - RWP55-BS Series - US ‖ UK ‖ CN ‖ DE ‖ ES ‖ FR ‖ IT ‖ TR

Where To Buy View More

PE39 Series

Where To Buy View More

700 Bar (10,000 PSI) COMPACT ELECTRIC TORQUE WRENCH PUMP

Features

Newly designed compact pump incorporates new proven pump design for reliable operation in rugged torque wrench applications.

10,000 psi (700 bar) compact electric torque wrench pump the pe39 is compact and capable of being used in a vertical or horizontal orientation.
Based on proven pump design for reliability in rugged torque wrench applications to support operation and maintenance requirements.
Over 100,000 cycles
Continuous duty up to 122˚F (50˚C) ambient
Proven design = proven reliability
Light weight and portable: 39 lb (17.7 kg)
Removable control pendant (15 ft / 5 m cord length)
Removable 4" (100 mm) calibration-capable gauge
Universal Motor for reduced voltage applications (up to -20% nominal voltage)
Vertical or horizontal operation
Easy install cooling fan as option

View Catalog - PE39 Series - US ‖ UK ‖ CN ‖ DE ‖ ES ‖ FR ‖ IT ‖ TR

PA60 Series

700 Bar (10,000 PSI) INFINITY SERIES (ISP) AIR PUMP

Features

The SPX FLOW PA60A is an Infinity Stage Air Pump which increases productivity on the job by providing continuous pressure for up to 2x the speed of typical 2-stage pumps. Jobs get done faster and easier.

Quality means Lower Life-Cycle Costs:

Over 100,000 cycles
Continuous duty up to 50°C (122°F) ambient
Proven design = Proven reliability

Enhanced Usability:

Light weight and portable: 77 lb (34.9 kg) [without oil] PA60APF5FP
Light weight and portable: 88 lb (40.1 kg) [without oil] PA60APF5FMPR
Removable control pendant (25 ft / 7.6 m)
Removable 4" (100 mm), calibration-capable gauge
CE
ATEX Ex II 2 GDc T4
4 port manifold available to power up to 4 tools from a single pump (not for lifting applications)
Fewer parts for lower service cost

Designed with Safety in Mind:

Easily adjusted pressure regulator (relief)

View Catalog - PA60A Series - US ‖ UK ‖ CN ‖ DE ‖ ES ‖ FR ‖ IT ‖ TR

Where To Buy View More

PE30 Series

Where To Buy View More

IDEAL FOR MAINTENANCE AND CONSTRUCTION APPLICATIONS

Deliver a powerful punch to operate single-acting or double-acting cylinders.
Integral roll cage protects pump from abuse.
1 hp (0,75 kW), single phase, permanent magnet motor.
High performance to weight ratio.
Starts under full load even when voltage is reduced to 50% of nominal rating.
Quit operations: 82 dBA @ 10,000 psi (700 bar) and 87 dBA @ 0 psi (0 bar). CSA rated for intermittent duty.
Remote controls and/or solenoid valves feature 24 volt controls.

View Catalog - PE30 Series - US ‖ UK ‖ ES ‖ FR

PE45 Series

700 Bar (10,000 PSI) INFINITY SERIES (ISP) ELECTRIC PUMP

Features

The infinite stage pump (ISP) incorporates technology that makes it an excellent choice for increasing productivity on the job.

10,000 psi (700 bar) infinity series (ISP) electric pump the SPX FLOW PE45 is an infinite stage electric pump which increases productivity on the job by providing continuous pressure for up to two times the speed of typical 2-stage pumps.
Jobs get done faster and easier.
over 100,000 cycles
continuous duty up to 122°f (50°c) ambient
proven design = proven reliability
enhanced usability: light weight: 71 lb (32.2 kg) [without oil]
removable control pendant (15 ft / 5 m)
removable (4") 100 mm, calibration-capable gauge
universal motor for reduced voltage applications (up to -20% nominal voltage)
4 tool manifold available powers up to 4 tools from a single pump (not for lifting applications)
high flow to get work done faster
designed with safety in mind:
easily adjusted pressure regulator
(relief) valve fixed 1,500 psi (103 bar) retract relief valve pressure

View Catalog - PE45 Series - US ‖ UK ‖ CN ‖ DE ‖ ES ‖ FR ‖ IT ‖ TR

Where To Buy View More

PG120 Series

Where To Buy View More

700 BAR (10,000 PSI) CLASSIC SERIES ELECTRIC HYDRAULIC PUMP

Features

Gasoline-powered pump for use in remote locations where electricity or compressed air are not readily available. Operates on a powerful 5.5 hp Honda OHV-type engine.

Quality means Lower Life-Cycle Costs:

High quality, reliable gasoline engine
Continuous duty
Proven design = proven reliability

Enhanced Usability:

Air cooled 4-stroke engine
Uses standard unleaded gasoline
Large capacity, multi-chamber exhaust system to reduce noise

Designed with Safety in Mind:

Fixed 48 bar (700 psi) Unload Valve
Frame allows for easy two-man carry

View Catalog - PG120 Series - US ‖ UK ‖ CN ‖ DE ‖ ES ‖ FR ‖ IT ‖ TR

HPUWP Series

Typical use:

Flange Pullers, Torque Wrenches, Nutsplitters
Self priming, 2-speed operation
2.24 kw (3 hp) Air motor (50 CFM)
700 bar (10,000 psi) maximum pressure
Calibratable 100mm (4") pressure gauge
Adjustable pressure relief valve
Flow rate up to 11.8 litres/min (720 cu. in/min)
Internal oil cooler
Low noise operation
Pneumatic Filter/Regulator/Lubricator
9.5 Litre (2 gal.) Reservoir (optional oil level gauge)
Carrying frame (WxLxH): 430 x 460 x 460 (mm)
Weight: 40 Kg (88 lb) (inc. oil)

View Catalog - HPUWP Series - US ‖ UK ‖ CN ‖ DE ‖ ES ‖ FR ‖ IT ‖ TR

Where To Buy View More

HPUTP Series

Where To Buy View More

1,500 Bar (21,750 PSI) TOPSIDE BOLT TENSIONER & HYDRAULIC PUMP

Standard flow tension pump. The corrosion-resistant frame works well for applications near saltwater. Standard flow ideal for land-based (topside) tension applications where the required power source is compressed air.

Quality means Lower Life-Cycle Costs:

Over 100,000 cycles
Continuous duty up to 122°F (50°C) ambient
Proven design = Proven reliability

Enhanced Usability:

Calibrated 6" (150mm) Pressure Gauge
Dual oil outlets with quick-connect, no spill couplings
Pneumatic Filter/Regulator/Lubricator included
Stainless Steel carry frame

Designed with Safety in Mind:

Easily adjusted pressure regulator valve
Air pressure safety relief valve

View Catalog - HPUTP Series - US ‖ UK ‖ CN ‖ DE ‖ ES ‖ FR ‖ IT ‖ TR

PE8 Series

1,500 Bar (21,750 PSI) HIGH PRESSURE ELECTRIC PUMP

Features

This newly designed electric tensioner pump incorporates proven design for reliable operation.

Quality means Lower Life-Cycle Costs:

Over 100,000 cycles
Continuous duty up to 122˚F (50˚C) ambient
Proven design = Proven reliability

Enhanced Usability:

Light Weight and portable: 45.5 lb (20.6 kg) [without oil]
Quick Release, removable control pendant (15 ft / 5 m)
Removable 4" (100 mm), calibration-capable, gauge
Universal Motor for reduced voltage applications (up to -20% nominal voltage)
SPX Tensioners are designed to daisy-chain together so multiple tools can run off one pump
Compact design fits into tight spaces

Designed with Safety in Mind:

Easily adjusted pressure regulator (relief) valve.

View Catalog - PE8 Series - US ‖ UK ‖ CN ‖ DE ‖ ES ‖ FR ‖ IT ‖ TR

Where To Buy View More

P59L-1500

Where To Buy View More

1,500 Bar (21,750 PSI) HIGH PRESSURE HAND PUMP

Features

Pressure Range - 0 to 1500 bar (0 to 21,750 psi)
Two-speed design reduces handle effort by 40%
Fiberglass handle provides rigidity, and reduces operator fatigue with grip.
Convenient fill port enables pumps to be filled in a horizontal or vertical position.
Fill cap seal acts as safety valve preventing over-pressurizing of reservoir.
Large valve knob gives added control for slowly metering loads down.
P59L-1500G model comes with a skid plate for stabilization and a digital pressure gauge.
Extremely lightweight, easy to transport with the aluminum body design.

View Brochure - 1500 Bar Hand Pump ‖ US ‖ GB

View Catalog - P59L-1500 Series - US ‖ UK ‖ CN ‖ DE ‖ ES ‖ FR ‖ IT ‖ TR

PE 60 Series

High Pressure Hydraulic Bolting Pump

The Bolting Systems PE60 SERIES High Pressure Hydraulic Bolting Pump is Designed and Configured to Meet A Variety of Tough Bolting Applications.

Quality means Lower Cost of Ownership:

Standard or Intelligent Autocycle technology options for fast bolt/nut rundown
True unloading valve achieves greater pump efficiency, allowing higher flow at maximum pressure
Weather resistant control panel and shrouds for motor/electrical protection

Enhanced Usability:

Hydraulic wrenches driven manually or through a continuous Autocycle operation
Lightweight and portable. Best performance-to-weight ratio of all Bolting Systems pumps
Ergonomic remote pendant, large button design, requiring low finger depression force to operate, decreasing operator fatigue
User friendly LCD / Keypad interface to enable quick setup and maximize productivity

Designed to fit to your application:

“Plug and Play” field installable accessories including an oil cooler and protective roll cage
LCD Models provide a host of information including digital pressure visibility, torque, run-time data and diagnostics
1.5 or 2.5 gallon deep draw reservoirs with O-ring Lip for leak-free operation
Single and 4-Port manifold option available for multi-tool use

View Brochure - PE60 SERIES High Pressure Hydraulic Bolting Pump ‖ US ‖ GB

Where To Buy View More

}