Global SPX FLOW

Global Website

Americas

Asia - Pacific

  • Centrifugal thermal fluid transfer pump, Hot oil pump, hot water pump

    CombiTherm Plus 2

  • Centrifugal thermal fluid transfer pump, Hot oil pump, hot water pump

    CombiTherm Plus

  • Centrifugal thermal fluid transfer pump, Hot oil pump, hot water pump

    CombiTherm Plus 3

Image 1of 3
  • Centrifugal thermal fluid transfer pump, Hot oil pump, hot water pump
  • Centrifugal thermal fluid transfer pump, Hot oil pump, hot water pump
  • Centrifugal thermal fluid transfer pump, Hot oil pump, hot water pump
MULTIMEDIA
video player
Product Type:

pumps

Centrifugal thermal fluid transfer pump. Hot oil pump and hot water pump for high temperature applications.
 
SPX FLOW Representatives
Find your local contact within your region for product inquiries
CONTACT US

CombiTherm Plus pumps are designed to handle thermal fluid transfer, including mineral or synthetic heat, and hot oil up to 660 °F at 360 PSI and hot water or glycol based thermal fluids up to 400 °F at 450 PSI without the need for expensive auxiliary cooling or shaft sealing systems. The optimized air cooling system, with shaft mounted cooling fan, ensures a low shaft seal temperature resulting in long service life and minimal down time. The CombiTherm Plus thermal fluid pump provides safe and efficient hot oil and hot water transfer in a wide range of applications. The heavy duty centrifugal pump is centerline mounted, which allows thermal expansion without affecting shaft alignment. This thermal fluid pump is available in two configurations suitable as a hot oil pump or hot water pump. The CombiTherm Plus hot oil pump has an open quench system with visual level indication and the hot water pump model comes with a steam eliminator on the seal chamber.


Additional Features:

  • Heavy duty, centerline mounted design with ASME B16.5 300 lbs flanges
  • Forced air-cooling with shaft mounted cooling fan
  • Labyrinth ring prevent solids from reaching journal bearing and seal
  • Product lubricated hard carbon journal bearing in metal cartridge
  • Balanced mechanical seal as standard
  • Quench with level indicator and optional leakage detection for hot oil execution
  • Grease lubricated heavy duty double row angular contact bearings
  • Safety chamber to protect ball bearings in case of seal failure

The air-cooled CombiTherm Plus thermal fluid pump provides safe transfer of hot oil or hot water in a wide range of applications, including injection molding, chemical processing, asphalt/bitumen and tar processing, deep frying systems, steam generators, fuel heaters, and heat recovery systems.


Thermal oil heat transfers

  • OEM systems
  • Maintaining temperature in jacketed equipment

Marine and Floating Production Systems: 

  • Fuel Tank Heaters
  • Fuel preheating
  • Cargo and Product Heating
  • Steam Generation

Food:

  • Ovens
  • Distillation of fatty acids and glycerine
  • Fat softening
  • Milk powder plants

Bitumen:

  • Asphalt production
  • Roads and roofing

Rubber and plastics:

  • Injection molding
  • PVC tape
  • Manmade fibers

Chemical:

  • Agitators reactors
  • Drying plants
  • Polymerization
  • Plastics

Paper and wood:

  • Calendar rolls
  • Cardboard
  • Washing machines and Driers
  • Floor board and wood panel

High temperature hot water circulation:

  • Hospitals
  • Heating systems
Casing:Ductile ironMax. liquid temp:

Thermal oil 350° C / 660° F 
Hot water 205° C / 400° F

Impeller:Cast ironMax. pressure:

Thermal oil 350 psi (25 bar)
Hot water 450 psi (31 bar)

Max. capacity:

1450 gpm (330 m^3/h)

Max. speed:3500 rpm
Max. delivery head:

500 ft (500 m) @ 3600 rpm