Global SPX FLOW

Global Website

Americas

Asia - Pacific

Copes-Vulcan

Global - English

Asia - Pacific

Cascade and Super Cascade Trims

  • Cascade Trim

    trim_cascade_1

  • Cascade Super Trim

    trim_cascade_super_1

Image 1of 2
  • Cascade Trim
  • Cascade Super Trim
Product Type:

cascade trims

Copes-Vulcan Cascade trim solves the problems of short life and high replacement costs for valve trim in high-pressure drop service.
 
Where to Buy
Our Sales Locator allows you to search representatives within your region for product inquiries
LOCATE A SALES REP

Copes-Vulcan Cascade trim solves the problems of short life and high replacement costs for valve trim in high-pressure drop service. It is a cage-guided plug throttling trim designed primarily for high-pressure drop water applications where cavitation, vibration and excess wear would occur with conventional trims.

Cascade trim features a series of labyrinth grooves, machined into the plug along its throttling surface. This series of grooves provides a cascading effect, so that the pressure drop is divided equally among the grooves. This reduces the amount of inner valve pressure recovery and subsequent vapor formation. Cascade trim is ideally suited for applications where cavitation can exist at low flow conditions, when the plug is just off the seat. By holding the clearance between the plug and the cage in the labyrinth groove section to close tolerances, the proper cascading effect is achieved.

Typical Applications:

  • Pump recirculation or bypass
  • High-pressure desuperheater – cooling water control
  • Supercritical boiler start-up reheat
  • Superheat spray control