BacktoMain
Products
- Analyzers
- Automation Systems
- Butter Equipment
- Centrifuges
- Cleaning-in-Place Systems
- Deareators
- Draught Regulators
- Evaporators
- Fat Crystalization Equipment
- Filters & Strainers
- Fluid Bed Dryers
- Heat Exchangers
- Homogenizers
- Membrane Filtration Systems
- Microparticulation Systems
- Mixers & Agitators
- Pasturization Systems
- Pigging Systems
- Plumbing Products
- Pumps
- Recreational Marine Products
- Spin Flash Dryers
- Spray Dryers
- UHT Systems
- Valves
- Adhesives & Sealants
- Automotive Heating System
- Baby Food
- Bakery Filing Cream
- Beer, Cider, Wine & Spirits
- Biodiesel
- Boats & Watercraft
- Building Infrastructure
- Butter & Spreads
- Cement
- Cheese
- Chocolate
- Coffee & Tea
- Condiments, Sauces & Soups
- Cosmetics
- Dairy Powders
- Ethanol
- Flavors & Fragrances
- Fruit Juice
- Fuel Supply System
- Hair, Nail & Skin Care Products
- Ice Cream
- Inorganic Chemicals
- Margarine & Shortening
- Meat & Animal-Based Proteins
- Milk & Cream
- Neutralization
- Nutraceuticals
- Oral Care
- Paints & Coatings
- Petrochemicals
- Pipelines
- Plant-Based Food & Beverages
- Plastic & Resins
- Refinery
- Soft Drinks
- Solvents & Solutions
- Specialty Chemicals
- Synthetic Rubber
- Yogurt
Bilge, Deck Wash & Refueling Pumps
Product Type(s) : Bilge Pumps
Description :
WHERE TO BUY
With their high level of flexibility, the DC driven pumps from SPXFLOW Johnson Pump are ideally suited for use in boats as bilge pumps, deck wash pumps, fresh water pumps and refuelling pumps for oil and diesel. Not to be used for pumping paraffin or other thin petroleum products. These pumps may be combined with a vacuum switch for automatic operation. Not to be used for pumping paraffin or other thin petroleum products.
FEATURES
- Limited 3 Year Warranty
- Typical applications: Bilge pump, fresh water pump, deck washing, fuel oil transfer, fire pump, oil change pump, etc.
- Full range of capacities from 15 - 55 l/min
- Oil-resistant impeller
- Self-priming
- Easy maintenance
- Handle debris (bilge pumping)
- Self-priming
- All motors are heavy duty to provide long service life even under heavy use
- Available in 12 or 24 volts
Product Specifications
Technical Data
|
Pump |
Part no | Motor | Body | Impeller | Seal | Connection | Lenght (mm) | Width (mm) | Height (mm) | Weight (kg) |
| F2P10-19 | 10-24886-01 | 12V | PTMT | 09-1077B-9 | Lip seal | 1/2" hose | 172 | 117 | 78 | 1,6 |
| F2P10-19 | 10-24886-02 | 24V | PTMT | 09-1077B-9 | Lip seal | 1/2" hose | 172 | 117 | 78 | 1,6 |
| F3B-19 | 10-24516-01 | 12V | Bronze | 09-1052S-9 | Lip seal | 3/8" BSP | 170 | 113 | 82 | 2 |
| F3B-19 | 10-24516-02 | 24V | Bronze | 09-1052S-9 | Lip seal | 3/8" BSP | 170 | 113 | 82 | 2 |
| F4B-19 | 10-24689-01 | 12V | Bronze | 09-824P-9 | Lip seal | Hose 1" 1/2" BSP |
202 | 120 | 90 | 3 |
| F4B-19 | 10-24689-02 | 24V | Bronze | 09-824P-9 | Lip seal | Hose 1" 1/2" BSP |
202 | 120 | 90 | 3 |
| F5B-19 | 10-24188-1 | 12V | Bronze | 09-1027B-9 | Mech. seal | 3/4" BSP | 258 | 131 | 120 | 8 |
| F5B-19 | 10-24188-2 | 24V | Bronze | 09-1027B-9 | Mech. seal | 3/4" BSP | 258 | 131 | 120 | 8 |
Pressure and Capacity Data(Based on Water at 20˚C/68˚F)
F2P10-19 |
Ampere Draw | |||||
| Bar | kPa | psi | l/min | GPM | 12 V | 24 V |
| Countinuous Duty | ||||||
| 0 | 0 | 0 | 15.0 | 4.0 | 5.6 | 4.0 |
| 0.1 | 10 | 1.45 | 14.5 | 3.8 | 5.7 | 4.0 |
| 0.2 | 20 | 2.90 | 14.0 | 3.7 | 5.8 | 4.1 |
| 0.3 | 30 | 4.35 | 13.5 | 3.6 | 5.9 | 4.1 |
| 0.6 | 60 | 8.7 | 11.0 | 2.9 | 6.1 | 4.2 |
| Intermittent Duty | ||||||
| 0.75 | 75 | 10.8 | 9.6 | 2.5 | 6.5 | 4.3 |
| 0.9 | 90 | 13.0 | 7.0 | 1.8 | 6.5 | 4.8 |
| Fuse Required | 15 A | 8 A | ||||
F3B-19 |
Ampere Draw | |||||
| Bar | kPa | psi | l/min | GPM | 12 V | 24 V |
| Continuous Duty | ||||||
| 0 | 0 | 0 | 21.0 | 5.5 | 8.4 | 4.0 |
| 0.1 | 10 | 1.45 | 20.5 | 5.4 | 8.5 | 4.0 |
| 0.2 | 20 | 2.9 | 20.0 | 5.3 | 8.6 | 4.1 |
| 0.3 | 30 | 4.35 | 19.5 | 5.2 | 8.8 | 4.1 |
| 0.6 | 60 | 8.7 | 17.8 | 4.7 | 9.0 | 4.2 |
| Intermittent Duty | ||||||
| 0.9 | 90 | 13.0 | 15.6 | 4.1 | 9.6 | 4.3 |
| 1.2 | 120 | 17.4 | 12 | 3.2 | 10.3 | 4.8 |
| Fuse Required | 15 A | 8 A | ||||
F38B-19 |
Ampere Draw | |||||
| Bar | kPa | psi | l/min | GPM | 12 V | 24 V |
| Continuous Duty | ||||||
| 0 | 0 | 0 | 35.0 | 9.2 | 10.9 | 5.0 |
| 0.1 | 10 | 1.45 | 33.8 | 8.9 | 11.0 | 5.1 |
| 0.2 | 20 | 2.9 | 32.2 | 8.5 | 11.0 | 5.1 |
| 0.3 | 30 | 4.35 | 31.0 | 8.2 | 11.1 | 5.2 |
| 0.6 | 60 | 8.7 | 25.5 | 6.7 | 11.9 | 5.4 |
| Intermittent Duty | ||||||
| 0.9 | 90 | 13.0 | 15.3 | 4.0 | 13.6 | 6.0 |
| 1.2 | 120 | 17.4 | 2.0 | 0.5 | 15.8 | 7.1 |
| Fuse Required | 15 A | 8 A | ||||
F4B-19 |
Ampere Draw | |||||
| Bar | kPa | psi | l/min | GPM | 12 V | 24 V |
| Continuous Duty | ||||||
| 0 | 0 | 0 | 48.0 | 12.7 | 12.2 | 6.5 |
| 0.1 | 10 | 1.45 | 45.0 | 11.9 | 12.3 | 6.7 |
| 0.2 | 20 | 2.9 | 44.5 | 11.7 | 12.2 | 6.8 |
| 0.3 | 30 | 4.35 | 41.0 | 10.8 | 13.1 | 7.1 |
| 0.6 | 60 | 8.7 | 34.0 | 9.0 | 14.9 | 7.5 |
| Intermittent Duty | ||||||
| 0.9 | 90 | 13.0 | 25.0 | 6.6 | 16.5 | 7.8 |
| 1.2 | 120 | 17.4 | 11.0 | 2.9 | 18.3 | 8.8 |
| Fuse Required | 15 A | 8 A | ||||
F5B-19 |
Ampere Draw | |||||
| Bar | kPa | psi | l/min | GPM | 12 V | 24 V |
| Continuous Duty | ||||||
| 0 | 0 | 0 | 55.0 | 14.5 | 23.2 | 11.9 |
| 0.3 | 30 | 1.45 | 49.4 | 13.1 | 24.2 | 12.8 |
| 0.6 | 60 | 8.7 | 39.9 | 10.5 | 25.1 | 13.3 |
| 0.9 | 90 | 13.0 | 30.1 | 8.0 | 26.2 | 14.0 |
| 1.2 | 120 | 17.4 | 19.3 | 5.1 | 28.0 | 14.7 |
| 1.5 | 150 | 21.76 | 9.3 | 2.4 | 29.8 | 15.3 |
| Fuse Required | 50 A | 25 A | ||||
| Recommended wire size | 16 mm2 | 6 mm2 | ||||