Viking Power Waste Water Pumps

Viking™ Power Wastewater Pumps

With our Viking Power series, Johnson Pump Marine offers waste water pump solutions, designed to meet the rigorous demands of the leading manufacturers of boats, recreational vehicles and buses.

Performance and Operation

Self-priming up to a height of three meters
Low pulse and muffled rubber bracket ensures pump offers quiet operation
Can be run dry, and can also handle a mixture of air and water without difficulty

Design and Engineering

Specifically designed to pump waste water, with double check valves for improved pumping action
Built to last, and engineered for easy maintenance
The premium grade reinforced nitrile rubber diaphragm can be replaced without having to remove the pump from the system
Non-choke valves make in-line filters unnecessary

Warranty and Accessories

Limited 3 Year Warranty
Delivered with 1" and 3/4" KlickTite XL connectors. 90° KlickTite XL connectors available as extra accessory

Viking Power 16

Compact Shower Drain, Bilge and Waste water Pump

A modern, single-chamber, self-priming diaphragm pump that can be set up in several different pump/motor configurations. It is easy to install anywhere after the drain outlet in the wastewater system or as a bilge pump in any leisure craft – new or used.

Specially designed to pump waste water
Easy to install, even in tight spaces
Quiet operation
Easy, low-cost maintenance
High-impact fiberglass reinforced nylon body
Ball-bearing supported transmission
Non-choke valves - no filters required
Self-priming up to 3 m (9.8 feet)
Can be run dry and can pump air/water mixture
Robust single diaphragm
KlickTite™ XL connectors standard
12V or 24V motors
Low power consumption
Complies with ISO15083 small craft bilge pump standards for vessels up to 12 m (39.4 feet)

Material Specifications

Motor	2.3 amp (12V), 1.2 amp (24V) at 0.1 bar 12/24V DC (with built-in thermal protection)
Body	Nylon, glass-fiber reinforced
Valves	Nitrile rubber
Diaphragm	Reinforced nitrile rubber

Technical Data

Part No.	Description	Capacity, open flow	Capacity at 0.1 bar	Max lift	Max head	Connection	Voltage	Fuse
10-13350-03	Viking Power 16 12V	16 l/min – 4.2 GPM	15 l/min – 4.0 GPM	3 m – 9.8 ft	3 m – 9.8 ft	1" and ¾" KlickTite XL connectors, 90° (Optional)	12 V	8 Amp
10-13350-04	Viking Power 16 24V	16 l/min – 4.2 GPM	15 l/min – 4.0 GPM	3 m – 9.8 ft	3 m – 9.8 ft	1" and ¾" KlickTite XL connectors, 90° (Optional)	24 V	5 Amp

Dimensions

Length	186 mm – 7.3"
Width	227/181 mm – 8.9"/7.1"
Height	117/204 mm – 4.6/8"
Weight	2.6 kg – 5.7 lbs

Viking Power 32

Compact Shower Drain, Bilge and Waste water Pump

A modern, heavy duty, single-chamber, self-priming diaphragm pump that can be set up in several different pump/motor configurations. It is easy to install anywhere after the drain outlet in the wastewater system or as a bilge pump in any leisure craft – new or used. Thanks to its single-chamber design and non-choke valves, the Viking Power 32, can be used to pump un-macerated sewage to a holding tank or transfer it onwards to a septic tank.

Maximum flow 32 l/min
Specifically engineered to pump black wastewater
Uncompromising odor-prevention features
Whisper quiet operation
Self-priming
High-impact glass-fiber reinforced nylon body
Ball-bearing supported transmission
Non-choke valves – no waste shredding required
Pump head rotatable 360°
Self-priming up to 2.5 meters (8.2 feet)
Can be run dry and can pump air/water mixture
Robust single diaphragm
Electric motor with power-out, manual-crank backup
Complies with ISO 15083 and small craft bilge pump
Standard for vessels above 12 m (39.4 ft)

Material Specifications

Motor	3.3 amp (12V),1.6 amp (24V) at 0.1 bar 12/24V DC (with built-in thermal protection)
Body	Nylon
Valves	Nitrile rubber
Diaphragm	Reinforced nitrile rubber

Technical Data

Part No.	Description	Capacity, open flow	Capacity at 0.1 bar	Max lift	Max head	Connection	Voltage	Fuse
10-13373-03	Viking Power 32 12V	32 l/min – 8.5 GPM	30 l/min – 7.9 GPM	2.5 m – 8.2 ft	4 m – 13.1 ft	38 mm / 1½"	12 V	12 Amp
10-13373-04	Viking Power 32 24V	32 l/min – 8.5 GPM	30 l/min – 7.9 GPM	2.5 m – 8.2 ft	4 m – 13.1 ft	38 mm / 1½"	24 V	6 AMP

Dimensions

Length	277 mm – 10.9"
Width	264 mm – 10.4"
Height	192 mm – 7.6"
Weight	5.0 kg – 11.0 lbs

Viking Power Vacuum

Compact Waste Water, Shower Drain and Bilge Pump

Engineered with a ball-bearing supported transmission for long service life. The Viking Power Vacuum pump cannot only be run dry, it can also handle a mixture of air and water without difficulty. The Viking Power Vacuum provides maximum flow of 32 L/min and is self-priming up to a height of 5 m. Although powered by an electric motor, this pump can also be cranked by hand in case of an emergency. The Viking Power Vacuum has double check-valves and can therefore also be used in vacuum toilet systems. Naturally, pumping ordinary shower or sink drain water or bilge water is no problem for this pump.

Maximum flow 32 L/min
Specifically engineered to pump black wastewater
Uncompromising odor-prevention features
Whisper quiet operation
Self-priming
High-impact glass-fiber reinforced nylon body
Ball-bearing supported transmission for long service life
Non-choke valves – no waste shredding required
Pump head rotatable 360°
Double check valves, suitable for vacuum systems
Self-priming up to 2.5 meters (8.2 feet)
Can be run dry and can pump air/water mixture
Robust single diaphragm
Electric motor with power-out, manual-crank backup
Complies with ISO 15083 and small craft bilge pump
Standard for vessels above 12 m (39.4 ft)

Material Specifications

Motor	3.3 amp (12V), 1.6 amp (24V) at 0.1 bar 12/24V DC (with built-in thermal protection)
Body	Nylon
Valves	Nitrile rubber
Diaphragm	Reinforced nitrile rubber

Technical Data

Part No.	Description	Capacity, open flow	Capacity at 0.1 bar	Max lift	Max head	Connection	Voltage	Fuse
10-13373-07	Viking Power Vacuum 12V	24 l/min – 6.3 GPM	22 l/min – 5.8 GPM	5 m – 16.4 ft	4 m – 13.1 ft	38 mm / 1½"	12 V	12 AMP
10-13373-08	Viking Power Vacuum 24V	24 l/min – 6.3 GPM	22 l/min – 5.8 GPM	5 m – 16.4 ft	4 m – 13.1 ft	38 mm / 1½"	24 V	6 AMP

Dimensions

Length	357 mm – 14"
Width	271 mm – 10.7"
Height	192 mm – 7.6"
Weight	5.1 kg – 11.2 lbs

Performance and Operation

Design and Engineering

Warranty and Accessories

Viking Power 16

Compact Shower Drain, Bilge and Waste water Pump

Material Specifications

Technical Data

Dimensions

Viking Power 32

Compact Shower Drain, Bilge and Waste water Pump

Material Specifications

Technical Data

Dimensions

Viking Power Vacuum

Compact Waste Water, Shower Drain and Bilge Pump

Material Specifications

Technical Data

Dimensions

Viking Series Diaphragm Waste Water Pumps - Johnson Pump Marine

Marine Toilets - Johnson Pump Marine